Today's oil markets demands
a bulk oil dispensing system
with
Simplicity - Mobility - Flexibility
We
Build It Strong And
Keep it Simple
How it Works.
Figure A
Shows us how the product in the storage tank is gravity fed through the check valve (2) into the reservoir
pumping tank (1). The air supply enters the system through the regulator with air/water filter (3). When the air
valve is activated, the check valve (2) closes and the product is dispensed from the reservoir pumping tank (1)
through the dispensing spigot (5), or through the hose reel (6). When the air supply is shut off, the reservoir delivery
tank (1) will qucik exhaust, the check valve (2) opens and gravity refills the reservoir pumping tank (1).
The cycle is approximately 90 seconds for 20 quarts. The storage tank is easily refilled at the filler opening (7) located in the
drip pan(8). Our optional fail-safe emergency lockable spigot(4) keeps you in business if power fails.
Features
Construction All Faith Line dispensing and storage tanks are manufactured to Underwriter's laboratory #142 Standards.
UL Labeled units are available upon request.
Reservoir Pumping Tank
Sump Style, always draws the fluid from the bottom of the storage tank. No build-up
of old fluids.
Flexibility
The basic unit gives you a choice of dispensing methods, top mounted spigot, reel/meter, easily upgrades.
Oil Spill Pan
Encloses the filling and dispensing area. Your choice of basic colors; red, green, blue, and yellow. Lets
you personalize each unit.
Your good name makes the difference-
Dipstick
For easy, accurate contents measurements.
Mobility
Optional casters provide you with convenient mobility. Makes units easy to install and remove.
Optional Fail-Safe Emergency
Spigot
Lockable side mounted, keeps you in business if air supply goes down.
Service We ship direct to your customer. Prepaid special
packages are available. All systems are pre-assembled as far
as possible. No expert installation is required. Ours is a
hands- on system for your hands-on customers and 24 hour 800
service is available.
Faith Tank's Unique Features
Faith Tank units have a unique pumping system...with only one moving part.
Typical ratio pumps, on the other hand, are constructed with 50 to 65
separate parts with one-third of these being moving parts. After wear and
tear, moving parts will eventually require service and replacement.
Generally, ratio pump repairs require special training and tools
and cannot be made in the field. Faith Tank units are constructed with
all servicable parts, allowing for clean and simple servicing if ever
needed. And no expert installation is required!
Additionally, the Faith Tank system lets you pump virtually every quart
out of the tank whereas the typical pump system pickup tubes leave
several quarts, even gallons that cannot be pumped out.
Our goal is to keep your equipment dollar working for you.
We are confident that our pricing structure with quantity discounts,
freight included and UL labeled pricing will allow you to save money
on all your bulk dispensing equipment needs.
What's More?
Dispensing method choices: top mounted spigot or reel and meter
Workbench Tops
Oill spill pan, available in wide variety of colors
Mobility through optional casters
Quality packaging for maximum protection in shipment and storage.
UL labeling available
|
|
Only one moving part for maintenance free operation
No expert installation
No ratio pump required!
Ability to operate units with a dispensing station at a remote location!
Optional casters, custon paint packages and other special features!
>
UL labeling available!
Competitive pricing
|
|
